PISTON CONTROL VALVES / BV 60: BACK PRESSURE CONTROL/PRESSURE RELIEF VALVE

BV 60: BACK PRESSURE CONTROL/PRESSURE RELIEF VALVE

The Brodie BV60 Back Pressure Control/Pressure Relief Valve is designed for close regulation of back pressure, pressure relief and surge control. In applications for metering systems or pipelines, the BV60 is used to hold a minimum back pressure on the outlet of a meter for more consistent operating conditions. In applications of pump relief or bypass, the valve is used to relieve excess pressure.

A constant back pressure is maintained within +/-2 psi [13.8 kPa] of set point, regardless of variations in flow rate or upstream pressure.

download specifications



contact brodie

Call +1 912 489 0200


 

TECHNICAL SPECIFICATIONS

Valve Size 2″ 3″ 4″ 6″ 8″ 12″
Dimensions
[flange to flange]
150 # inches 10 1/4 11 13 17 22 1/2 30 7/8
mm 260 279 330 432 571 784
Dimensions
[flange to flange]
300 # inches 13 1/8 14 1/2 17 7/8 23 1/2
mm 333 368 454 597
Capacity Cv-gpm 90 190 315 700 1300 2950
Pressure
Approvals
150 # SEP SEP SEP CRN, PED CRN, PED CRN, PED
300 # PED PED PED — —
CHECK VALVE FUNCTIONALITY

The valve piston spring, biased to the closed position, has equal front and rear surface areas. This means that every Brodie Model BV valve has check valve functionality, with bubble-tight shut-off – no additional system check valve is required to prevent reverse flow. The valve will only open when upstream pressure is sufficient to overcome spring force.

BRODIE VS DIAPHRAGM VALVES

There are many advantages in using piston-operated control valves as opposed to diaphragm-operated valves, including:

  • High flow capacity – lower pressure drop
  • Optimum control at low flow gives better batching control
  • Simple O-ring sealing – no special diaphragms
  • Alternative O-rings easily obtainable per product specifications
Designed to meet the challenges for today’s petroleum and environmental needs, Brodie’s positive sealing and linear action control valves provide uniform speed of response and leak-proof performance.

REDUCED COST OF OWNERSHIP

  • Long service life, only one moving part
  • Cylinder can be removed without removing body from the line
  • Cylinder assemblies available as replacement kits

SECURITY & CONTROL

  • Automatic shutoff for emergency protection
  • Pressure monitoring at all times

UNIFORM SPEED OF RESPONSE
Flow modulation avoids delayed response and valve slam.

  • Pilot operated
  • Positive Sealing/Zero Leakage
  • Modular construction/easy inline service
  • Adjustable opening and closing speeds – prevents damaging shock pressure
  • Linear action control for uniform fast speed of control
  • Simple design without diaphragms
  • Common valve body and internal mechanism simplifies spare parts inventory
  • Multiple control functions can be performed with one valve